4월 . 26, 2024 12:08 다시 목록으로

Ice principle and process of cube ice making machine ICE MACHINE

그만큼 ice cube maker is named after the shape of the ice it makes is cube. Do you know how such ice is made?

플레이크 제빙기

Ice principle and process of cube ice making machine

The principle of ice making:

Through the ice cube maker’s make-up water valve, water automatically enters a water reservoir.

Then, the water is pumped to the diverter head through the flow control valve, and sprayed evenly on the surface of the ice maker.

The water that has not been evaporated and frozen will flow into the water storage tank through the porous tank, and the cycle will be repeated.

Until the ice cubes reach the thickness we need, the hot air discharged from the compressor is re-introduced back into the wall of the ice maker to replace the low-temperature liquid refrigerant.

In this way, a water film is formed between the ice and the wall of the evaporation tube, and the water film plays a lubricating role when the ice falls into the groove under the influence of gravity.

Water from the ice harvest cycle will also be returned to the water storage tank through the perforated tank, preventing wet ice from being discharged by the machine.

Ice making process:

1.First through the water inlet valve, the water automatically enters the water storage tank;

2.The water pump in the tank pumps water to the shunt pipe, and the shunt pipe evenly distributes the water to the cooled evaporator;

3.When the ice cube reaches the set thickness, it enters the de-icing state;

4.At the same time, the high-pressure hot air of the compressor will be diverted to the evaporator by the reversing valve, forming a water film lubrication between the evaporator and the ice cubes;

5.The lubricated ice cubes fall to the ice storage tank by gravity.

That’s it, pieces of transparent ice are made by the cube ice maker, and beautiful and delicious drinks are made in bars, milk tea shops, KTVs, etc.

공유하다